Accessories

In manufacturing, the Weld line or Knit line or Meld line is the line where two flow fronts meet when there is the inability of two or more flow fronts to "knit" together, or "weld", during the molding process. These lines usually occur around holes or obstructions and they will not affect the waterproof functionality.

In the Camera Extender Kit you will get access to the Command Center platform, a 32ft (10m) ruggedized USB-C cable, a multi-task dongle (ACB1000), a mounting adapter for your power housing (ATH2000), a cable clip, and ten cable ties.

No, the AFB1000 is specially designed for the BCC2000.

Other EMPOWER series cameras (TLC2020/BBT2000/BAC2000) can be used however you also need an ATH2000 power housing to install the AFB1000 securely.

There are four capture modes available: Time Lapse, Step Video, Stop Motion, and Still Photo.

With the AFB1000 you will have instant access to your camera on your laptop through the 32ft cable. Using an AFB1000, you can prevent needing to climb up a ladder to check your camera’s battery and SD card status, adjust settings, check the live view, and download files. It is totally ladderfree. Just plug the cable into your laptop to gain camera access.

Please refer to our video tutorial here.

Connect your camera to a laptop (Windows 64-bit OS) via the AFB1000 and use the Brinno Command Center platform to access live view, check battery and SD card status, adjust settings, and download files.

Please apply here.

No, make sure to always use the multi-task dongle otherwise you risk your camera malfunctioning.

1.Check that your computer system is Windows 7, 8, 8.1, or 10 with 64-bit Operating System in order to be compatible with the Command Center.

2.Make sure your multi-task dongle and cable are plugged in correctly.

3.Restart your PC and the Command Center.

4.If you are still running into issues contact customer service at customerservice@brinno.com

Only download one file at a time through the Command Center. Make sure you only download completed files, for example if you filming in Daily Mode only download files from the previous days.

If you are still running into issues try using your computer file explorer instead to access and download files.

Still running into issues? Contact customerservice@brinno.com

The ACC1000 is the clamp mount that comes with the BCC2000 bundle. The ACC1000P is exactly the same as ACC1000, but also comes with an Extension Pole that increases the clamping distance from 3.5 to 10.6 in (90 to 270 mm).

Clamp: Stainless Steel; Aluminum

Magic Arm: Stainless Steel; Aluminum

Extension Pole & Wrench: Stainless Steel

The mount’s clamping range is from 0.04”-3.5" (10 - 90 mm) and further extends to 10.6" (270 mm) with the extension pole.

Yes, the ACC1000P is compatible with every Brinno time-lapse camera and waterproof housing.

Yes, the clamp comes with two grip sides. One grip side is for clamping onto flat surfaces and another for poles and other curved surfaces. When installing your mount pick the most suitable grip side, flat or curved, for your environment.

The ACC1000P Magic Arm has a load capacity of 6.6 lb (3 kg) and the clamp can withstand up to 110 lb (50 kg) without extension pole.

Please follow our installation tutorial here.

The clamp mount is fully adjustable and comes with a 360-degree rotating tripod, double ball joint that allows for up to a 90-degree tilt.

Yes, It can be used to mount on all the Brinno time-lapse cameras.

You can fix up the AWM100 in two ways, either by sticker or screws. By sticker, you have to remove the sticker seal on the sticker and paste the AWM100 on the wall for at least 24 hours. By Screws, you have to use a screwdriver to screw the AWM100 to fix it on the wall.

Yes, the AWM100 has an adjustable locking swivel that allows for precise positioning, 65° vertical, 65° horizontal movement.

It is 1/4" screw thread with lock.